ISO 7816-2 PDF
ISO/IEC specifies the dimensions and locations for each of the contacts on an integrated circuit card of an ID-1 card type. It also provides. ISO describes the physical characteristics of smart chip cards. It includes accommodation of exposure limits for electromagnetic phenomena such as. ISO is one of most important standards in the smart card industry. Parts of ISO specify physical characteristics, dimensions and location of the.
|Published (Last):||10 March 2018|
|PDF File Size:||2.4 Mb|
|ePub File Size:||13.13 Mb|
|Price:||Free* [*Free Regsitration Required]|
The reset signal is asserted by the interface device and is used to start up the program contained in the IC ROM. It specifies the physical characteristics, layout, recording techniques, numbering system and registration procedures.
Most IC cards have a power consumption of between 10mA and 20mA at 3. While this is certainly one way of comparing cards fabricated by different companies, whether it bears any relationship to the use of IC cards in the field seems debatable. The transmission protocol must take account of this need to turn the line around. For this purpose the back is defined to be the side with the magnetic stripe.
This standard relates to the card identification number izo PAN Primary Account Number which consists of three parts, the issuer identifer number IINthe individual 7186-2 identifier and the check digit.
ISO – important industry standard for integrated circuit cards
ISO Identification cards numbering system and registration procedure for issuer identifers The parity bit is defined to achieve even parity which means that the number of 1’s in the 8 data bits and the parity bit together results in an even number.
The ISO standard aligns jso the use of two widely used external clock frequencies, 3. As you move higher in the architecture towards the specification of the application then the problems of interoperability are less relevant since it is not generally necessary to have compatibility between the applications themselves.
The ISO family includes eleven parts which are in a constant state of flux as they are subject to revision and update. The synchronous mode of operation is more commonly met with the memory card ICs as used for telephone applications. These chips may operate with a supply voltage of 3volts which results in lower current consumption.
The resistance of the card to static electricity is defined by a test set up as shown in figure 8. ISO716-2. Many observers have commented that the widespread use of Smart Cards is being impeded by the lack of standards.
Created inamended in,updated in Retrieved from ” https: According to its abstract, it specifies the Data Elements DEs used for interindustry interchange based on integrated circuit cards ICCs both with contacts and without contacts. The former frequency is the more widely used being based on the NTSC colour sub carrier frequency and results in a clock divider of in order to produce a bit per second not exact but within tolerance serial communication speed.
While we are all familiar with the use 786-2 imprinters to obtain a printed version of the embossed characters on some paper voucher, their viability on an IC card must be questionable.
Area 1 is for the number identifying both the card issuer and the card holder. This standard is in five parts and covers the specification of the magnetic stripe iwo the card embossing. This anomaly has been a source of irritation and it is now widely agreed that the IC connector should be on the front of the card.
The ISO standard defines the location of contacts and dimensions. There have been problems in the past with terminals supplying the wrong programming voltage with somewhat drastic effects.
It should be noted that the thickness dimension does not include any allowance for embossing. The asynchronous type of transmission is similar to that used by the serial RSC connector met on the personal computer.
The 7816 Standard
More particularly the slot for a card may include an extra indentation for the embossed area of the card. Related Posts Smart Card.
This standard applies to the ID – 1 identification card specified in ISO and includes cards which may have embossing or magnetic stripes. Commands and mechanisms for security operations”. Introduction To Smart Cards – Page 2.
This is an additional characteristic to the magnetic field sensor which operates off the magnetic stripe and 7816- used to open a mechanical gate on devices such as ATMs where some vandal proofing techniques are required.
The ISO standard includes specifications for the commands for card management. We might ixo to conjecture on which is the better position for the chip in iiso of mechanical stress but perhaps we should just settle for agreement. Leave this field empty. The three most widely used tests applied by fabricators are specified in the annex to the standard: As the title implies, this part of the standard specifies the location of embossed characters on an ID -1 card for which two areas are assigned.
The following provides the primary interests of this standard:. Two transmission protocols are included in it: